EWS511AP Wireless Access Point

EWS511AP Wireless Managed Indoor Wall Plate Access Point All-in-One Communication “Hub” for In-Room Wireless Connectivity The edge 802.11ac built-in high performance Access Point for in-room use on multiple applications.

รหัสสินค้า: EWS511AP หมวดหมู่: , , , ,
แชร์สิ่งนี้:
Share on facebook
Share on twitter
Share on pinterest
Share on reddit

รายละเอียด

Features

  • Support up to 433 Mbps in 5GHz frequency band and 300 Mbps in 2.4GHz frequency band
  • Support 802.11ac Wave 2.0 technology to enhance overall bandwidth and speed to wireless client devices.
  • 360° omni-directional antennas to achieve comprehensive coverage for networking client devices under a pervasive environment.
  • Compliance with 802.3af/Proprietary 48V- 54V PoE Input for flexible installation over 100 meters (328 feet)
  • The 2nd Ethernet port to extend wireless signal to networking devices including a switch, access points, IP cameras and video boxes easily.
  • Systemic and distributed management over EnGenius ezMaster and EWS Management switch without licensing or subscription fee.
  • Perform one-click update to deliver a configuration over multi-segments for managed Access Points.
  • Choose an operating mode to meet your management and deployment requirement. (Managed mode/Stand alone mode)

ข้อมูลเพิ่มเติม

น้ำหนัก 0.290 kg
ขนาด 13 × 11 × 3.7 cm
Access Point Type

2.4GHz 802.11 n 2×2 MIMO is backwardscompatible with 802.11 b/g, 5GHz 802.11 ac 1×1 MIMO is backwards compatible with 802.11 a/n mode, dual radios concurrent, Indoor

SU-MIMO

Four(2) spatial stream SU-MIMO for up to 733 Mbps wireless data rate to a single wireless client device.

Frequency

2.4GHz: 2400MHz ~ 2835MHz, 5GHz: 5150MHz~5250MHz, 5GHz: 5250MHz~5350MHz, 5GHz: 5470~5725MHz, 5GHz: 5725MHz~5850MHz

Supported Radio Technology

802.11ac supports very high throughput (VHT) —VHT 20/40/80 MHz, 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM), 802.11b: Direct-sequence spread-spectrum (DSSS), 802.11n supports high throughput (HT) —HT 20/40 MHz, 802.11n/ac packet aggregation: A-MPDU / A-SPDU, 802.11n/ac: 2×2 MIMO with 2 streams on 2.4GHz radio and 1×1 with 1 stream on 5GHz radio

Supported Modulation Type

802.11a/g/n: BPSK / QPSK / 16-QAM / 64-QAM, 802.11ac: BPSK / QPSK / 16-QAM / 64-QAM / 256-QAM, 802.11b: BPSK / QPSK / CCK

Transmit Power

2.4GHz: 18dBm, 5GHz: 18dBm

Supported data rates

802.11a/g: 6 / 9 / 12 / 18 / 36 / 48 / 54, 802.11ac: 6.5 to 733(MCS0 to MCS9 / NSS=1 ), 802.11b: 1 / 2 / 5.5 / 11, 802.11n: 6.5 to 300 (MCS0 to MCS15)

Power Consumption

9W

Power Source

Power Over Ethernet: 802.3af Input

Integrated Antenna

2.4GHz: 4.5dBi, 5GHz: 5.0dBI

Networking Interface

Two (2) 10/100 BASE-T RJ-45 Ethernet Ports

LED Indicators

Display system and wireless transmission status

Reset Button

Convert Access Point to the Factory default or the Users Default

Ceiling Mounting

Assemble a mounting bracket to attach into T-rail for drop ceiling

Wall Mounting

Mount Access Point on a flat wall

Temperature Range

Operating: 0°C~40°C (32°F~104°F), Storage: -30°C~80°C (-22°F~176°F)

Humidity

Operating: 0%~90% typical, Storage: 0%~90% typical

Warranty

1-Year Standard

เว็บไซต์นี้ใช้คุกกี้
เราใช้คุกกี้เพื่อนำเสนอคอนเทนต์บริการและสินค้าผลิตภัณฑ์ที่ท่านอาจสนใจเพื่อให้ท่านได้รับประสบการณ์ที่ดีบนบริการของเรา หากท่านใช้บริการเว็บไซต์ของเราต่อไปโดยไม่ได้ปรับการตั้งค่าใดๆ เราเข้าใจว่าท่านยินยอมที่จะรับคุกกี้บนเว็บไซต์ของเรา อ่านเพิ่มเติมเกี่ยวกับคุกกี้