Hardware specifications
|
Radio
|
Dual-radio dual-band:
Radio 1: 2.4G 11ax/5G 11ax: 2×2 MIMO
Radio 2: 5G 11ax: 2×2 MIMO |
Protocol
|
Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac |
Operating Bands
|
802.11b/g/n/ax :2.4G ~ 2.483GHz
802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz (vary depending on different countries) |
Spatial Streams
|
Up to 4: 2×2:2 in 2.4GHz , 2×2:2 in 5GHz |
Max Throughput
|
Maximum throughput (5G+5G mode) per AP: 2.4Gbps
Radio1:5G low band 1.2Gbps
Radio2:5G high band 1.2Gbps
2.4G+5G operation mode, maximum throughput per AP: 1.775Gbps
Radio1:2.4G 0.574Gbps
Radio2:5G 1.2Gbps |
Modulation
|
OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps
DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps
MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM
OFDMA (up to 1024-QAM) |
Receiver Sensitivity
|
11b:-96dBm(1Mbps),-93dBm(5Mbps),-89dBm(11Mbps)
11a/g:-91dBm(6Mbps),-85dBm(24Mbps),-80dBm(36Mbps),-74dBm(54Mbps)
11n:-90dBm(MCS0),-70dBm(MCS7),-89dBm(MCS8),-68dBm(MCS15)
11ac HT20:-88dBm(MCS0), -63dBm(MCS9)
11ac HT40:-85dBm(MCS0), -60dBm(MCS9)
11ac HT80:-82dBm(MCS0), -57dBm(MCS9)
11ax HT80:-82dBm(MCS0), -57dBm(MCS9), -52dBm(MCS11) |
Antenna
|
Integrated antenna design |
Antenna Gain
|
2.4G: 3dBi
5G: 3dBi |
Service Ports
|
1 10/100/1000M Ethernet ports, PoE In |
Management Port
|
1 console port |
Reset Button
|
Support |
Anti-theft Lock
|
Support |
LED Indicator
|
1 LED indicator (Support red, green, blue, orange and flashing mode, which indicates device access) |
Transmit Power
|
≤100mw(20dBm) (vary depending on different countries)
|
Adjustable Power
|
1dBm |
Power Supply
|
Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed)
PoE (802.3af) – full spectrum operation
|
Power Consumption
|
<12.95W |
|
Physical Specifications |
Temperature
|
Operating Temperature: -10°C to 50°C |
Storage Temperature: -40°C to 70°C |
Humidity
|
Operating Humidity: 5% to 95% (non-condensing) |
Storage Humidity: 5% to 95% (non-condensing) |
Installation Mode
|
Ceiling/wall-mountable |
Dimensions (W x D x H)
|
153mm ×193mm x26mm(Height of the AP only, excluding the mount kit) |
Weight
|
≤0.5kg (include mount kit) |
IP Rating
|
IP41 |
MTBF
|
250,000 hours |
Certifications and Compliance
|
Wi-Fi Alliance
|
· Wi-Fi CERTIFIED™ a, b, g, n, ac
· Wi-Fi CERTIFIED 6™
· WPA3™-Enterprise, Personal
· Wi-Fi Enhanced Open™
· Wi-Fi Agile Multiband™
· WMM® |
Safety Standard
|
GB4943, EN/IEC 62368-1 |
EMC Standard
|
GB9254, EN301 489 |
Radio Standard
|
SRRC, EN300 328, EN301 893
|
Software Specifications
|
WLAN |
Maximum clients per AP |
1024 (Recommended Client: 64) |
BSSID capacity |
Up to 32 |
SSID hiding |
Support |
5G Priority (Band Steering) |
Support |
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID |
Support |
Remote Intelligent Perception Technology (RIPT) |
Support |
Intelligent device recognition technology |
Support |
Intelligent load balancing based on the number of users or traffic |
Support |
STA control |
SSID/radio-based |
Bandwidth control |
STA/SSID/AP-based bandwidth control |
Data encryption |
WPA(TKIP), WPA-PSK, WPA2(AES), WPA3, WEP(64/128 bits) |
PSK and web authentication |
Support |
PPSK authentication (For Employee) |
Support (require wireless controller) |
802.1x authentication |
Support |
PEAP authentication |
Support |
Data frame filtering |
Whitelist, static/dynamic blacklist |
User isolation |
Support |
Rogue AP detection and countermeasure |
Support |
Dynamic ACL assignment |
Support |
RADIUS |
Support |
CPU Protection Policy (CPP) |
Support |
Network Foundation Protection Policy (NFPP) |
Support |
IP |
IPv4 and IPv6 address
|
Support
|
Multicast routing
|
Multicast to unicast conversion
|
DHCP service
|
DHCP Snooping, Option 82, Server, Client
|
Management and Maintenance
|
Supported wireless LAN controllers
|
Ruijie WS Series Wireless Controller
Ruijie MACC-Base Software Controller
Ruijie Cloud (Public Cloud) |
Management protocol |
Telnet, SSH, TFTP, Web |
Wireless Intelligent AI Optimization Service (WIS) |
Support |
SNMP |
SNMPV1,V2c,V3 |
LLDP |
LLDP, LLDP-MED, LLDP-POE |
Syslog / Debug |
Support |
FAT/FIT/MACC mode switching |
Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |
|